32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
M.2 formerly known as the Next Generation Form Factor (NGFF) is a specification for internally mounted computer expansion cards and associated connectors. The M.2 replaces the mSATA standard.
|
|
|
|
Helios64 provides an M.2 interface (J2) to connect the following expansion cards:
|
|
|
|
* M.2 SATA SSD
|
|
* M.2 USB2.0 modules (e.g NPU extension).
|
|
|
|
|
|
|
|
!!! Important
|
|
PCIe SSD is not supported.
|
|
|
|
## Form Factor and Keying
|
|
|
|
The M.2 connector (J2) is Key-B which is compatible with most of M.2 SATA SSD of Key-B or Key-M+B Key form factors.
|
|
|
|
|
|
|
|
The board provides mounting holes for 2260 and 2280 cards.
|
|
|
|
|
|
|
|
## Usage
|
|
|
|
The M.2 interface on Helios64 only supports SATA 3.0 and USB 2.0 buses.
|
|
|
|
The M.2 SATA bus is shared with SATA Port 1. Therefore if you install an M.2 SATA SSD card, SATA Port 1 (J3) will automatically get disabled. But if you use the M.2 interface for USB modules, the SATA Port 1 (J3) is still enabled and accessible by the system.
|
|
|
|
For more details refer to [SATA page](/helios64/sata/).
|
|
|
|
!!! Note
|
|
The M.2 interface on Helios64 may NOT support USB modem (WWAN) because USB modem often requires external SIM Card connection and other signals.
|