27 lines
1.5 KiB
Markdown
27 lines
1.5 KiB
Markdown
## Serial ATA (SATA)
|
|
|
|
Helios64 use the JMicron JMB585 controller, this controller support up to 5 port SATA devices.
|
|
The SATA controller support following features:
|
|
|
|
- 5 SATA ports,
|
|
- command-based and FIS-based for Port Multiplier,
|
|
- compliance with SATA Specification Revision 3.2,
|
|
- AHCI mode and IDE programming interface,
|
|
- Native Command Queue (NCQ),
|
|
- SATA link power saving mode (partial and slumber),
|
|
- SATA plug-in detection capable,
|
|
- drive power control and staggered spin-up,
|
|
- SATA Partial / Slumber power management state.
|
|
|
|
the SATA Controller is connected to the PCIe port in RK3399, the PCIe bus is compatible with PCI Express Base Specification Revision 2.1.
|
|
Bandwidth of this PCIe is 5GT/s.
|
|
|
|
Following graphics is showing the mux diagram of the SATA Controller:
|
|
|
|
bikin diagram mux (multiplexer) seperti di USB (/helios64/usb/#usb-type-c-functionality-on-helios64)
|
|
|
|
The power delivery of the SATA Controller is devided into two group, this power control scenario is performed to reduce the inrush current when all the HDDs turned on simultaneously.
|
|
The 8 Pin MOLEX connector for the SATA Connector is devided into two group. The first group will power on 3 HDDs in the initial stage, and the second group will power on another 2 HDDs later.
|
|
|
|
disebelah connector battery ada MOLEX 8 pin klo ga salah. itu nanti pake kabel khusus biar keluar jadi MOLEX yg SATA
|
|
grup 1 aktif duluan, nyalain 3 HDD. nanti beberapa saat kemudian grup 2 aktif buat nyalain sisanya (2 HDD)
|