dbroqua/kobol-wiki
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Clarifiy some H64 install intructions.

Browse source
This commit is contained in:
Gauthier Provost 2020-10-20 13:19:43 +08:00
parent 7b9bea6083
commit ec998f2742
9 changed files with 17 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

5
docs/helios64/install/emmc.md
View file

@ -62,6 +62,9 @@ sudo dd if=helios64_sdcard_u-boot-only.img of=/dev/sdX bs=4M conv=fsync status=p
!!! warning
Always proceed with caution when manipulating 110/220V appliance.
!!! important
If your system has the UPS battery accessory installed, then check your board is really powered off before going any further. Check [Front Panel System ON LED](/helios64/front-panel/#helios64-enclosure) or [Board System ON LED](/helios64/led/) is **off**. If not *off*, then press Power-On Button for ~4 seconds until System ON LED goes off.
1. Insert the prepared microSD Card.
2. Connect your computer to the serial port with the Type-C to Type-A USB cable.
@ -78,7 +81,7 @@ If you are using Helios64 without an enclosure:
## **Step 4** - Power-Up Helios64
Now that everything is ready you can plug-in the AC adapter and push the [Power Button](/helios64/button/).
Now that everything is ready you can plug-in the AC adapter and push the [Power-On Button](/helios64/button/).
![Enclosure Power ON](/helios64/install/img/power-on_A.png)

9
docs/helios64/install/first-start.md
View file

@ -66,12 +66,19 @@ Now that everything is ready you can plug-in the AC adapter and push the [Power
If you are using Helios64 without an enclosure:
![Enclosure Power ON](/helios64/install/img/power-on_B.png)
![Board Power ON](/helios64/install/img/power-on_B.png)
You should see Helios64 boot logs on the Serial Console.
![Boot Output](/helios64/install/img/boot-output.png)
If you missed the boot logs, another way to check if your system has fully booted is to look at the System LED which acts as system heartbeat. If Operating System has booted properly and is alive, the System LED should be blinking.
![Enclosure System LED](/helios64/install/img/system-led_A.png)
![Board System LED](/helios64/install/img/system-led_B.png)
## **Step 3** - Log in
!!! note

BIN
docs/helios64/install/img/power-on_B.png
View file

Binary file not shown.
Side by side Swipe Overlay

Before

Width:  |  Height:  |  Size: 397 KiB

After

Width:  |  Height:  |  Size: 134 KiB

Before After
Before After

BIN
docs/helios64/install/img/system-led_A.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 8.7 KiB

BIN
docs/helios64/install/img/system-led_B.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 138 KiB

3
docs/helios64/install/sdcard.md
View file

@ -60,6 +60,9 @@ sudo dd if=Armbian_20.08.0_Helios64_buster_current_5.7.15.img of=/dev/sdX bs=4M
!!! warning
Always proceed with caution when manipulating 110/220V appliance.
!!! important
If your system has the UPS battery accessory installed, then check your board is really powered off before going any further. Check [Front Panel System ON LED](/helios64/front-panel/#helios64-enclosure) or [Board System ON LED](/helios64/led/) is **off**. If not *off*, then press Power-On Button for ~4 seconds until System ON LED goes off.
1. Insert the prepared microSD Card.
2. Connect your computer to the serial port with the Type-C to Type-A USB cable.