diff --git a/docs/helios4/intro.md b/docs/helios4/intro.md index 5a29286..cdfbfdb 100644 --- a/docs/helios4/intro.md +++ b/docs/helios4/intro.md @@ -4,7 +4,7 @@ disqus: Helios4 is a powerful ARM based board specially designed for Network Attached Storage. It harnesses its processing capabilities from the **ARMADA 38x-MicroSoM** from [SolidRun](https://wiki.solid-run.com/doku.php?id=products:a38x:microsom). - +![Helios64](/helios4/img/intro/helios4.jpg) The **Marvell ARMADA® 388** is a robust and energy-efficient System on Chip (SoC) with a collection of high speed interfaces especially suited for headless data processing, networking and storage. This Dual-core ARM Cortex A9 CPU clocked at 1.6 Ghz, paired with 2GB of ECC memory, integrates a Cryptographic and XOR DMA engines to provide the best level of performance and reliability for NAS functionalities. diff --git a/docs/helios64/hardware.md b/docs/helios64/hardware.md index f713ee6..551f405 100644 --- a/docs/helios64/hardware.md +++ b/docs/helios64/hardware.md @@ -14,66 +14,37 @@ This block diagram is cited from the RK3399 website documentation. [1](http://op | Name | Peripheral Type | Connector Type | Details | |-----|---------------|--------------|-------| -| P8 | [SATA Cont. Mem. Flash Enable Jumper](/helios64/jumper/#sata-controller-flash-mux-p8) | 2x1 Pin Header | Sata Controller Flash Memory Enable | -| P9 | [eFuse Dis. Jumper](/helios64/jumper/#efuse-power-enable-p9) | Not Populated | eFuse Power Supply | -| P10 | [eMMC Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable eMMC boot | -| P11 | [SPI Flash Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable SPI Flash | -| P13 | [HS Select Jumper](/helios64/jumper/#hs-select-p13) | 2x1 Pin Male Header | USB-C HS Select (Close = Type C HS, Open = Console) | +| J1 | [USB 3.0](/helios64/usb/#usb-on-helios64) | USB 3.0 Type-A | USB 3.0 Port 3 | +| J2 | [M.2 SATA](/helios64/sata/) | M.2 Key-B | M.2 Slot for SATA SSD
or USB 2.0 Device | +| J3 | [SATA](/helios64/sata/) | SATA 3.0 | Port 0 (SATA1) | +| J4 | [SATA](/helios64/sata/) | SATA 3.0 | Port 1 (SATA2) | +| J5 | [SATA](/helios64/sata/) | SATA 3.0 | Port 2 (SATA3) | +| J6 | [SATA](/helios64/sata/) | SATA 3.0 | Port 3 (SATA4) | +| J8 | [SATA](/helios64/sata/) | SATA 3.0 | Port 4 (SATA5) | +| J7 | HDD Power | 8 Pin Mini-Fit Jr | HDD Power 5V + 12V
(supports 5x HDD) | +| J9 | [UPS Battery](/helios64/battery/#li-ion-battery) | 6 Pin Mini-Fit Jr | UPS Battery Power | +| J10 | ATX PSU | 4 Pin Mini-Fit Jr | DC input 12V | +| J11 | [LAN1](/helios64/ethernet/) | RJ45 | Gigabit Ethernet | +| J12 | [LAN2](/helios64/ethernet/) | RJ45 | 2.5 Gigabit Ethernet | +| J13 | [USB 3.0 (x2)](/helios64/usb/#usb-on-helios64) | Dual USB 3.0 Type-A | USB 3.0 Port 1 and 2 | +| J14 | microSD | Push-Push card connector | Support SDHC and SDXC | +| J15| [USB Type-C](/helios64/usb/#usb-type-c-functionality-on-helios64) | USB Type-C Connector | Supports following:
- DisplayPort Mode
- DAS Mode
- Host Mode
- Serial Console | +| J16| DC-IN | Kycon 4-Pin Mini-DIN | DC input 12V | +| P1 | [I2C](/helios64/i2c/#i2c-at-p1-header) | 4x1 Pin Header | I2C Bus | +| P2 | [UEXT](/helios64/uext/) | 2x5 Pin Header | Universal EXTension
(I2C, SPI and UART)| +| P3 | [Front Panel](/helios64/front-panel/) | 12x2 Pin Header | Front Panel Extension | +| P4 | Buzzer | 2x1 Pin Header | Buzzer Alarm Speaker | +| P5 | [GPIO](/helios64/gpio/) | 7x2 Pin Header | User Configurable GPIO | +| P6 | [PWM Fan](/helios64/fan/) | 4x1 Pin Header | Fan 1 with PWM support | +| P7 | [PWM Fan](/helios64/fan/) | 4x1 Pin Header | Fan 2 with PWM support | +| P8 | [SATA Ctrl. Programming](/helios64/jumper/#sata-controller-flash-mux-p8) | 2x1 Pin Header | SATA Controller Flash Enable | +| P9 | [eFuse Programming](/helios64/jumper/#efuse-power-enable-p9) | 2x1 Pin Header | eFuse Power Supply Enable | +| P10 | [eMMC Disable](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Header | Disable eMMC | +| P11 | [SPI Flash Disable](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Header | Disable SPI Flash | +| P12 | [Battery Configuration](/helios64/battery/) | 2x1 Pin Header | Enable 3S1P Battery Support | +| P13 | [HS Select Jumper](/helios64/jumper/#hs-select-p13) | 2x1 Pin Male Header | USB-C HS Mode | | P14 | [ATX Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) | 2x1 Pin Male Header | ATX Supply Priority | | P15 | [ACDC Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) | 2x1 Pin Male Header | ACDC(AC Adapter) Supply Priority | -| USB 3.0 | [USB3 Host](/helios64/usb/#usb-on-helios64) | USB 3.0 Host | USB 3.0 Port Header | -| SATA1 | SATA | SATA 3.0 | Port 0 (SATA1) | -| SATA2 | SATA | SATA 3.0 | Port 1 (SATA2) | -| SATA3 | SATA | SATA 3.0 | Port 2 (SATA3) | -| SATA4 | SATA | SATA 3.0 | Port 3 (SATA4) | -| SATA5 | SATA | SATA 3.0 | Port 4 (SATA5) | -| HDD_PWR | HDD Power Conn. | 8 Pin ATX 12V | Rated for 5x HDD | -| BATT | [Battery Power Conn.](/helios64/battery/#li-ion-battery) | 6 Pin ATX 12V | Battery Backup | -| ATX_4P | ATX Power Supply Conn. | 4 Pin ATX 12V | 4 Pin ATX Power Connector | -| 1Gbps ETH | LAN1 | RJ45 | Gigabit Ethernet | -| 2.5Gbps ETH | LAN2 | RJ45 | 2.5 Gigabit Ethernet | -| MICRO SD | microSD | Push-Push card connector | Support SDHC and SDXC | -| USB-C| [USB Type-C Dual Role](/helios64/usb/#usb-type-c-functionality-on-helios64) | USB Type-C Connector | Via onboard FTDI USB-to-UART0 bridge | -| PWR CON | DC Connector | Kycon 4-Pin Mini-DIN | DC input 12V / 8A | -| FAN1 | [Fan Connector](/helios64/fan/) | 4x1 Pin Male Header | PWM and RPM support | -| FAN2 | [Fan Connector](/helios64/fan/) | 4x1 Pin Male Header | PWM and RPM support | -| P1 | [I2C Header](/helios64/i2c/#i2c-at-p1-header) | 4x1 Pin Male Header | I2C Bus 1 | -| P2 | [UEXT Header](/helios64/uext/) | 2x5 Pin Male Header | Universal EXTension Support [2] | -| P3 | [Front Panel Header](/helios64/front-panel/) | 12x2 Pin Male Header | PWM and RPM support | -| P4 | Buzzer Header | 2x1 Pin Header | Buzzer Speaker Support | -| P5 | [GPIO Pin Header](/helios64/gpio/) | 7x2 Pin Male Header | GPIO configurable as input or output
Via IO Expander on I2C Bus 0 | -| PWR BTN | [Power Button](/helios64/button/#power-button) | Push Button | Power Button | -| RECOVERY | [Recovery Button](/helios64/button/#recovery-button) | Push Button | | -| RST BTN | [Reset Button](/helios64/button/#reset-button) | Push Button | Reset Button | - -## Power Consumption - -**Board only** - -* Idle : X.X Watts -* Active : X.X Watts - -**Full Kit (with 5x HDDs)** - -| State | AC calculated
power consumption | DC measured
power consumption | Remarks | -|---------------------|----------------------|----------------------|---------------------| -| Idle | X.X W | X.X W | | -| HDD Read Access | X.X W | X.X W | | -| HDD Write Access | X.X W | X.X W | | -| Standby | X.X W | X.X W | HDD in Standby mode | -| Suspend-to-Ram | X.X W | X.X W | HDD in Standby mode | - -!!! note - Measures were done using a Current Clamp Meter on the Helios64 12V DC input. AC Power consumption is calculated based on a AC/DC conversion efficiency of 85%. - - * Meter tool : Extech 380942 - 30A True RMS AC/DC Mini Clamp - * AC/DC Adapter : (efficiency : YY%) - * AC Input Voltage: 220V - * HDD: 5x YYY XX TB (HDDCODEXX) configured as RAIDXX - * Network : Connected at 1000Mb/s - * OS: ARMBIAN Z.Z stable Debian GNU/Linux 10 (buster) 5.4.xx-yyy - - -## References -1. http://opensource.rock-chips.com/wiki_File:RK3399_Block_Diagram.png -2. https://en.wikipedia.org/wiki/UEXT +| SW1 | [Power Button](/helios64/button/#power-button) | Push Button | Power Button | +| SW2 | [Recovery Button](/helios64/button/#recovery-button) | Push Button | Recovery Button | +| SW3 | [Reset Button](/helios64/button/#reset-button) | Push Button | Reset Button | diff --git a/docs/helios64/img/hardware/helios64_board_labeled.jpg b/docs/helios64/img/hardware/helios64_board_labeled.jpg index dd953cc..80fd2bf 100644 Binary files a/docs/helios64/img/hardware/helios64_board_labeled.jpg and b/docs/helios64/img/hardware/helios64_board_labeled.jpg differ