Some fixes and cleanup

docs/helios64/hardware.md

@@ -16,34 +16,34 @@ This block diagram is cited from the RK3399 website documentation. [1](http://op
 
 | Name | Peripheral Type | Connector Type | Details |
 |-----|---------------|--------------|-------|
-| J1 | [USB 3.0](/helios64/usb/#usb-on-helios64) | USB 3.0 Type-A | USB 3.0 Port 3  |
-| J2 | [M.2 SATA](/helios64/sata/) | M.2 Key-B | M.2 Slot for SATA SSD<br> or USB 2.0 Device |
+| J1 | [USB 3.0](/helios64/usb/) | USB 3.0 Type-A | USB 3.0 Port 3  |
+| J2 | [M.2](/helios64/m2/) | M.2 Key-B | M.2 Slot for SATA SSD<br> or USB 2.0 Device |
 | J3 | [SATA](/helios64/sata/) | SATA 3.0 | Port 0 (SATA1) |
 | J4 | [SATA](/helios64/sata/) | SATA 3.0 | Port 1 (SATA2) |
 | J5 | [SATA](/helios64/sata/) | SATA 3.0 | Port 2 (SATA3) |
 | J6 | [SATA](/helios64/sata/) | SATA 3.0 | Port 3 (SATA4) |
 | J8 | [SATA](/helios64/sata/) | SATA 3.0 | Port 4 (SATA5) |
-| J7 | HDD Power | 8 Pin Mini-Fit Jr | HDD Power 5V + 12V<br>(supports 5x HDD) |
-| J9 | [UPS Battery](/helios64/battery/#li-ion-battery) | 6 Pin Mini-Fit Jr | UPS Battery Power |
+| J7 | [HDD Power](/helios64/sata/#hdd-power) | 8 Pin Mini-Fit Jr | HDD Power 5V + 12V<br>(supports 5x HDD) |
+| J9 | [UPS Battery](/helios64/ups/) | 6 Pin Mini-Fit Jr | UPS Battery Power |
 | J10 | ATX PSU | 4 Pin Mini-Fit Jr | DC input 12V |
 | J11 | [LAN1](/helios64/ethernet/) | RJ45 | Gigabit Ethernet |
 | J12 | [LAN2](/helios64/ethernet/) | RJ45 | 2.5 Gigabit Ethernet |
-| J13 | [USB 3.0 (x2)](/helios64/usb/#usb-on-helios64) | Dual USB 3.0 Type-A | USB 3.0 Port 1 and 2  |
+| J13 | [USB 3.0 (x2)](/helios64/usb/) | Dual USB 3.0 Type-A | USB 3.0 Port 1 and 2  |
 | J14 | microSD | Push-Push card connector | Support SDHC and SDXC |
-| J15| [USB Type-C](/helios64/usb/#usb-type-c-functionality-on-helios64) | USB Type-C Connector | Supports following:<br>- DisplayPort Mode<br>- DAS Mode<br>- Host Mode<br>- Serial Console |
-| J16| DC-IN | Kycon 4-Pin Mini-DIN | DC input 12V |
-| P1 | [I2C](/helios64/i2c/#i2c-at-p1-header) | 4x1 Pin Header | I2C Bus |
+| J15| [USB Type-C](/helios64/usb/#type-c-functionality-on-helios64) | USB Type-C Connector | Supports following:<br>- DisplayPort Mode<br>- DAS Mode<br>- Host Mode<br>- Serial Console |
+| J16| AC Adapter | Kycon 4-Pin Mini-DIN | DC input 12V |
+| P1 | [I2C](/helios64/i2c/) | 4x1 Pin Header | I2C Bus |
 | P2 | [UEXT](/helios64/uext/) | 2x5 Pin Header | Universal EXTension<br>(I2C, SPI and UART)|
 | P3 | [Front Panel](/helios64/front-panel/) | 12x2 Pin Header | Front Panel Extension |
 | P4 | Buzzer | 2x1 Pin Header | Buzzer Alarm Speaker |
 | P5 | [GPIO](/helios64/gpio/) | 7x2 Pin Header | User Configurable GPIO |
-| P6 | [PWM Fan](/helios64/fan/) | 4x1 Pin Header | Fan 1 with PWM support |
-| P7 | [PWM Fan](/helios64/fan/) | 4x1 Pin Header | Fan 2 with PWM support |
+| P6 | [PWM Fan](/helios64/pwm/) | 4x1 Pin Header | Fan 1 with PWM support |
+| P7 | [PWM Fan](/helios64/pwm/) | 4x1 Pin Header | Fan 2 with PWM support |
 | P8 | [SATA Ctrl. Programming](/helios64/jumper/#sata-controller-flash-p8) | 2x1 Pin Header | SATA Controller Flash Enable |
 | P9 | [eFuse Programming](/helios64/jumper/#efuse-power-enable-p9) | 2x1 Pin Header | eFuse Power Supply Enable |
 | P10 | [eMMC Flash Disable](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Header | Disable eMMC |
 | P11 | [SPI Flash Disable](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Header | Disable SPI Flash |
-| P12 | [Battery Configuration](/helios64/ups/) | 2x1 Pin Header | *unpopulated*  |
+| P12 | Battery Configuration | 2x1 Pin Header | *unpopulated*  |
 | P13 | [USB Console/Recovery Mode](/helios64/jumper/#usb-consolerecovery-mode-p13) | 2x1 Pin Male Header | USB-C HS Mode |
 | P14 | [ATX Priority Jumper](/helios64/jumper/#dc-in-priority-p14-p15) | 2x1 Pin Male Header | ATX Supply Priority |
 | P15 | [ACDC Priority Jumper](/helios64/jumper/#dc-in-priority-p14-p15) | 2x1 Pin Male Header | AC Adapter Supply Priority |

docs/helios64/ups.md

@@ -1,3 +1,5 @@
+# UPS (Uninterruptible Power Supply)
+
 Helios64 provides a built-in UPS feature to protect your data from unexpected power loss. The feature requires an additional Li-Ion Battery to be connected to header J9 .
 
 ![J9 Location](/helios64/img/ups/j9.jpg)
@@ -42,4 +44,4 @@ Battery charge is fully managed by hardware, no software required. Charging func
 |  Off | Charge complete |
 |  Blinking | Fault / Battery Absent |
 
-**Note:** The estimated time to fully charge the battery is around 8 Hours.
+**Note:** The estimated time to fully charge the empty battery is around 4 hours.

mkdocs.yml

@@ -85,7 +85,7 @@ nav:
     - SATA : 'helios64/sata.md'
     - SPI : 'helios64/spi.md'
     - UEXT : 'helios64/uext.md'
-    - UPS Battery : 'helios64/ups.md'
+    - UPS : 'helios64/ups.md'
     - USB : 'helios64/usb.md'
 - Helios4:
   - Introduction: 'helios4/intro.md'