remove reset button on verview
This commit is contained in:
parent
c0aef955b8
commit
557757b9d6
1 changed files with 2 additions and 6 deletions
|
@ -15,7 +15,7 @@ This block diagram is cited from the RK3399 website documentation. [1](http://op
|
|||
| Name | Peripheral Type | Connector Type | Details |
|
||||
|-----|---------------|--------------|-------|
|
||||
| P8 | [SATA Cont. Mem. Flash Enable Jumper](/helios64/jumper/#sata-controller-flash-mux-p8) | 2x1 Pin Header | Sata Controller Flash Memory Enable |
|
||||
| P9 | [eFuse Dis. Jumper](/helios64/jumper/#efuse-power-enable-p9) | Not Populated | **TBD** eFuse Power Supply |
|
||||
| P9 | [eFuse Dis. Jumper](/helios64/jumper/#efuse-power-enable-p9) | Not Populated | eFuse Power Supply |
|
||||
| P10 | [eMMC Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable eMMC boot |
|
||||
| P11 | [SPI Flash Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable SPI Flash |
|
||||
| P13 | [HS Select Jumper](/helios64/jumper/#hs-select-p13) | 2x1 Pin Male Header | USB-C HS Select (Close = Type C HS, Open = Console) |
|
||||
|
@ -46,10 +46,6 @@ This block diagram is cited from the RK3399 website documentation. [1](http://op
|
|||
| RECOVERY | [Recovery Button](/helios64/button/#recovery-button) | Push Button | |
|
||||
| RST BTN | [Reset Button](/helios64/button/#reset-button) | Push Button | Reset Button |
|
||||
|
||||
## Reset Button
|
||||
|
||||
Helios64 board provides a RESET push button (RST BTN) to hard reset the board.
|
||||
|
||||
## Power Consumption
|
||||
|
||||
**Board only**
|
||||
|
@ -75,7 +71,7 @@ Helios64 board provides a RESET push button (RST BTN) to hard reset the board.
|
|||
* AC Input Voltage: 220V
|
||||
* HDD: 5x YYY XX TB (HDDCODEXX) configured as RAIDXX
|
||||
* Network : Connected at 1000Mb/s
|
||||
* OS: ARMBIAN Z.Z stable Debian GNU/Linux 10 (buster) 5.4.xx-yyy
|
||||
* OS: ARMBIAN Z.Z stable Debian GNU/Linux 10 (buster) 5.4.xx-yyy
|
||||
|
||||
|
||||
## References
|
||||
|
|
Loading…
Add table
Reference in a new issue