From 34fc77d889bd7892ac71d9fd6126e710f95e991a Mon Sep 17 00:00:00 2001
From: Gauthier Provost <gauthier@kobol.io>
Date: Wed, 8 Apr 2020 18:59:07 +0800
Subject: [PATCH] Remove eMMC page

---
 docs/helios64/emmc.md | 31 -------------------------------
 mkdocs.yml            |  1 -
 2 files changed, 32 deletions(-)
 delete mode 100644 docs/helios64/emmc.md

diff --git a/docs/helios64/emmc.md b/docs/helios64/emmc.md
deleted file mode 100644
index 3d84e55..0000000
--- a/docs/helios64/emmc.md
+++ /dev/null
@@ -1,31 +0,0 @@
-## eMMC
-
-Helios64 use the Samsung KLMAG1JETD-B041 chip, this storage has features:
-
- - embedded MultiMediaCard Ver. 5.1 compatible.
- - SAMSUNG eMMC supports features of eMMC5.1 which are defined in JEDEC Standard.
- - Major Supported Features : HS400, Field Firmware Update, Cache, Command Queuing, Enhanced Strobe Mode, Secure Write Protection, Partition types.
- - Non-supported Features : Large Sector Size (4KB).
- - Backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-eMMC systems).
- - Data bus width : 1bit (Default), 4bit and 8bit.
- - MMC I/F Clock Frequency : 0 ~ 200MHz
- - MMC I/F Boot Frequency : 0 ~ 52MHz
-
-SAMSUNG eMMC adopts Enhanced User Data Area as Single-Level Cell (SLC) Mode.
-Therefore when master adopts some portion as enhanced user data area in User Data Area, that area occupies double size of original set up size. (ex> if master set 1MB for enhanced mode, total 2MB user data area is needed to generate 1MB enhanced area).
-
-The eMMC chip installed in Helios64 support the HS400 MODE, with following features:
-
- - eMMC 5.1 product supports high speed DDR interface timing mode up to 400MB/s at 200MHz with 1.8V I/O supply.
- - HS400 mode supports the following features:
- - DDR Data sampling method
- - CLK frequency up to 200MHz DDR (up to 400Mbps)
- - Only 8-bits bus width available
- - Signaling levels of 1.8V
- - Six selectable Drive Strength (refer to the table below)
-
-Following table describe the I/O Driver Strength Types
-
-![driver type](/helios64/img/emmc/driver-type.png)
-		
-Support of Driver Type-0 is default for HS200 & HS400 Device
diff --git a/mkdocs.yml b/mkdocs.yml
index 37cc8d4..1130d33 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -72,7 +72,6 @@ nav:
   - Hardware:
     - Overview : 'helios64/hardware.md'
     - Button : 'helios64/button.md'
-    - eMMC : 'helios64/emmc.md'
     - Ethernet : 'helios64/ethernet.md'
     - Front Panel : 'helios64/front-panel.md'
     - GPIO : 'helios64/gpio.md'