kobol-wiki/docs/helios64/front-panel.md

Helios64 provides an external front panel interface via a 24-Pin header (P3) in order to expose system buttons and LEDs.

![P3 Location](/helios64/img/front-panel/fp_header.jpg)

## Pinout

![P3 Pinout](/helios64/img/front-panel/fp_header_pinout.jpg)

| PIN | Port | Direction |
|-----|------|-----------|
| 1   | SATA Consolidated Activity LED |
| 2   | Power On LED |
| 3   | Ground |
| 4   | Ground |
| 5   | RESET Button |
| 6   | POWER Button |
| 7   | USR1 Button |
| 8   | USR2 Button |
| 9   | Network Activity LED |
| 10  | USB Activity LED |
| 11  | 3V3 |
| 12  | System On LED |
| 13  | System Error LED |
| 14  | SATA 0 Activity LED |
| 15  | SATA 0 Error LED |
| 16  | SATA 1 Activity LED |
| 17  | SATA 1 Error LED |
| 18  | SATA 2 Activity LED |
| 19  | SATA 2 Error LED |
| 20  | SATA 3 Activity LED |
| 21  | SATA 3 Error LED |
| 22  | SATA 4 Activity LED |
| 23  | SATA 4 Error LED |
| 24  | Ground |

### Wiring Example

**LED wiring:**

![P3 LED Wiring](/helios64/img/front-panel/fp_led_wiring.jpg)

*LED output pins are Active High.*

**Button wiring:**

![P3 Button Wiring](/helios64/img/front-panel/fp_button_wiring.jpg)

*Button input pins are Active Low.*

## Helios64 Enclosure

The official Helios64 enclosure comes with a specially designed front panel that connects to the 24-Pin header (P3) and USB 3.0 Port (J1). This front panel exposes all the on-board [LEDS](/helios64/led/) and [Buttons](/helios64/button/) required to operate the Helios64 NAS along with an USB 3.0 port for data loading / offloading.

![Front Panel Label](/helios64/img/front-panel/fp_labels.jpg)

### PCB Details

![Front Panel PCB RHS](/helios64/img/front-panel/fp_pcb_render.jpg)

* All switches are push buttons.
* All Error LEDs are red while Status / Activity LEDs are blue.
* USB 3.0 Port is provided by a USB 3.0 Type A Female to Male extension cable.

![Front Panel PCB LHS](/helios64/img/front-panel/fp_pcb_silkscreen.jpg)

### PCB Wiring

The Helios64 Front Panel is already mounted with the USB 3.0 extension cable and with a ribbon cable + header snapped to the ICD connector (P1).

The wiring between Helios64 main board and the front panel is illustrated in figures below:

![Front Panel Connection 1](/helios64/img/front-panel/fp_pcb_wiring1.jpg)

![Front Panel Connection 2](/helios64/img/front-panel/fp_pcb_wiring2.jpg)


!!! Warning
    Please be careful with the 24-Pin header polarity. Make sure that Pin 1 of main board P3 header is connected to the Pin 1 of front panel P1 ICD connector.