43 lines
1.7 KiB
Markdown
43 lines
1.7 KiB
Markdown
|
## Onboard Button
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
### Power Button
|
||
|
|
|
||
|
|
Helios64 board provides a POWER push button (PWR BTN) to power on/off the system.
|
||
|
|
This button is connected to PMIC RK808-D.
|
||
|
|
|
||
|
|
Short press (~1 second) will turn on the system when the current state is power off. On Linux, this will inform kernel to perform gracefull shutdown.
|
||
|
|
|
||
|
|
Long press (~4 seconds **TBC**) will signals PMIC to cut off the power in case of system not responding (Force power off).
|
||
|
|
|
||
|
|
This button also routed to Front Panel, so user don't need to open the case to power on/off the system.
|
||
|
|
|
||
|
|
### Reset Button
|
||
|
|
|
||
|
|
Helios64 board provides a RESET push button (RST BTN) to hard reset the board.
|
||
|
|
|
||
|
|
This button also routed to Front Panel, so user don't need to open the case to hard reset the system.
|
||
|
|
|
||
|
|
### Recovery Button
|
||
|
|
|
||
|
|
User can enter recovery mode by pressing this button during boot up (bootloader stage). U-Boot will read this button and switch the USB type C into USB Mass Storage device with eMMC as the storage.
|
||
|
|
User then can use Balena Etcher or dd to write OS image into eMMC.
|
||
|
|
|
||
|
|
On Linux, this button behave as user button and when pressed will emit **BTN_0** keycode.
|
||
|
|
|
||
|
|
This button also routed to Front Panel, so user don't need to open the case to enter Recovery Mode.
|
||
|
|
|
||
|
|
|
||
|
|
## Front Panel Button
|
||
|
|
|
||
|
|
For button location on front panel please refer to [Front Panel](/helios64/front-panel/#the-front-panel-description).
|
||
|
|
|
||
|
|
### USR2 Button
|
||
|
|
|
||
|
|
There is additional user button on Front Panel board located on [P2](/helios64/front-panel/#wiring-diagram). On Linux, this button when pressed will emit **BTN_1** keycode.
|
||
|
|
|
||
|
|
|
||
|
|
## References
|
||
|
|
[input-event-codes.h](https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/plain/include/uapi/linux/input-event-codes.h)
|