kobol-wiki/docs/helios64/hardware.md

## Block Diagram

### Helios64 Board
![!Block Diagram](/helios64/img/hardware/helios64_block_diagram.png)

### RK3399 System-On-Chip
![!Block Diagram](/helios64/img/hardware/rk3399_block_diagram.png)

This block diagram is cited from the RK3399 website documentation. [1](http://opensource.rock-chips.com/wiki_File:RK3399_Block_Diagram.png)

## Connector / Interface List

![!Board Legend](/helios64/img/hardware/helios64_board_labeled.jpg)

| Name | Peripheral Type | Connector Type | Details |
|-----|---------------|--------------|-------|
| P8 | [SATA Cont. Mem. Flash Enable Jumper](/helios64/jumper/#sata-controller-flash-mux-p8) | 2x1 Pin Header | Sata Controller Flash Memory Enable |
| P9 | [eFuse Dis. Jumper](/helios64/jumper/#efuse-power-enable-p9) | Not Populated | eFuse Power Supply |
| P10 | [eMMC Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable eMMC boot |
| P11 | [SPI Flash Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) | 2x1 Pin Male Header | Disable SPI Flash |
| P13 | [HS Select Jumper](/helios64/jumper/#hs-select-p13) | 2x1 Pin Male Header | USB-C HS Select (Close = Type C HS, Open = Console) |
| P14 | [ATX Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) | 2x1 Pin Male Header | ATX Supply Priority |
| P15 | [ACDC Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) | 2x1 Pin Male Header | ACDC(AC Adapter) Supply Priority |
| USB 3.0 | [USB3 Host](/helios64/usb/#usb-on-helios64) | USB 3.0 Host | USB 3.0 Port Header  |
| SATA1 | SATA | SATA 3.0 | Port 0 (SATA1) |
| SATA2 | SATA | SATA 3.0 | Port 1 (SATA2) |
| SATA3 | SATA | SATA 3.0 | Port 2 (SATA3) |
| SATA4 | SATA | SATA 3.0 | Port 3 (SATA4) |
| SATA5 | SATA | SATA 3.0 | Port 4 (SATA5) |
| HDD_PWR | HDD Power Conn. | 8 Pin ATX 12V | Rated for 5x HDD |
| BATT | [Battery Power Conn.](/helios64/battery/#li-ion-battery) | 6 Pin ATX 12V | Battery Backup |
| ATX_4P | ATX Power Supply Conn. | 4 Pin ATX 12V | 4 Pin ATX Power Connector |
| 1Gbps ETH | LAN1 | RJ45 | Gigabit Ethernet |
| 2.5Gbps ETH | LAN2 | RJ45 | 2.5 Gigabit Ethernet |
| MICRO SD | microSD | Push-Push card connector | Support SDHC and SDXC |
| USB-C| [USB Type-C Dual Role](/helios64/usb/#usb-type-c-functionality-on-helios64) | USB Type-C Connector | Via onboard FTDI USB-to-UART0 bridge |
| PWR CON | DC Connector | Kycon 4-Pin Mini-DIN | DC input 12V / 8A |
| FAN1 | [Fan Connector](/helios64/fan/) | 4x1 Pin Male Header | PWM and RPM support |
| FAN2 | [Fan Connector](/helios64/fan/) | 4x1 Pin Male Header | PWM and RPM support |
| P1 | [I2C Header](/helios64/i2c/#i2c-at-p1-header) | 4x1 Pin Male Header | I2C Bus 1 |
| P2 | [UEXT Header](/helios64/uext/) | 2x5 Pin Male Header | Universal EXTension Support [2] |
| P3 | [Front Panel Header](/helios64/front-panel/) | 12x2 Pin Male Header | PWM and RPM support |
| P4 | Buzzer Header | 2x1 Pin Header | Buzzer Speaker Support |
| P5 | [GPIO Pin Header](/helios64/gpio/) | 7x2 Pin Male Header | GPIO configurable as input or output<br>Via IO Expander on I2C Bus 0 |
| PWR BTN | [Power Button](/helios64/button/#power-button) | Push Button | Power Button |
| RECOVERY | [Recovery Button](/helios64/button/#recovery-button) | Push Button |  |
| RST BTN | [Reset Button](/helios64/button/#reset-button) | Push Button | Reset Button |

## Power Consumption

**Board only**

* Idle  : X.X Watts
* Active : X.X Watts

**Full Kit (with 5x HDDs)**

| State               | AC calculated<br>power consumption | DC measured<br>power consumption | Remarks             |
|---------------------|----------------------|----------------------|---------------------|
|  Idle               | X.X W               | X.X W               |                     |
|  HDD Read Access    | X.X W               | X.X W               |                     |
|  HDD Write Access   | X.X W               | X.X W               |                     |
|  Standby            | X.X W               | X.X W                | HDD in Standby mode |
|  Suspend-to-Ram     | X.X W               | X.X W                | HDD in Standby mode |

!!! note
    Measures were done using a Current Clamp Meter on the Helios64 12V DC input. AC Power consumption is calculated based on a AC/DC conversion efficiency of 85%.

    * Meter tool : Extech 380942 - 30A True RMS AC/DC Mini Clamp
    * AC/DC Adapter :  (efficiency : YY%)
    * AC Input Voltage: 220V
    * HDD: 5x YYY XX TB (HDDCODEXX) configured as RAIDXX
    * Network : Connected at 1000Mb/s
    * OS: ARMBIAN Z.Z stable Debian GNU/Linux 10 (buster) 5.4.xx-yyy


## References
1. http://opensource.rock-chips.com/wiki_File:RK3399_Block_Diagram.png
2. https://en.wikipedia.org/wiki/UEXT
removing .gitignore 2020-02-13 11:38:14 +07:00			`## Block Diagram`

update the hardware overview 2020-03-02 06:56:31 +07:00			`### Helios64 Board`
updating hardware, uext, and m2 pages 2020-03-10 19:44:01 +07:00			`![!Block Diagram](/helios64/img/hardware/helios64_block_diagram.png)`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`### RK3399 System-On-Chip`
updating hardware, uext, and m2 pages 2020-03-10 19:44:01 +07:00			`![!Block Diagram](/helios64/img/hardware/rk3399_block_diagram.png)`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`This block diagram is cited from the RK3399 website documentation. [1](http://opensource.rock-chips.com/wiki_File:RK3399_Block_Diagram.png)`

			`## Connector / Interface List`

updating i2c and hadware page 2020-03-05 16:59:14 +07:00			`![!Board Legend](/helios64/img/hardware/helios64_board_labeled.jpg)`
removing .gitignore 2020-02-13 11:38:14 +07:00
Move jumper and boot mode into their own page On overview table, create link to its respective pages 2020-03-16 14:07:07 +07:00			`\| Name \| Peripheral Type \| Connector Type \| Details \|`
			`\|-----\|---------------\|--------------\|-------\|`
			`\| P8 \| [SATA Cont. Mem. Flash Enable Jumper](/helios64/jumper/#sata-controller-flash-mux-p8) \| 2x1 Pin Header \| Sata Controller Flash Memory Enable \|`
remove reset button on verview 2020-03-16 17:17:17 +07:00			`\| P9 \| [eFuse Dis. Jumper](/helios64/jumper/#efuse-power-enable-p9) \| Not Populated \| eFuse Power Supply \|`
Move jumper and boot mode into their own page On overview table, create link to its respective pages 2020-03-16 14:07:07 +07:00			`\| P10 \| [eMMC Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) \| 2x1 Pin Male Header \| Disable eMMC boot \|`
			`\| P11 \| [SPI Flash Dis. Jumper](/helios64/jumper/#boot-mode-p10-p11) \| 2x1 Pin Male Header \| Disable SPI Flash \|`
			`\| P13 \| [HS Select Jumper](/helios64/jumper/#hs-select-p13) \| 2x1 Pin Male Header \| USB-C HS Select (Close = Type C HS, Open = Console) \|`
			`\| P14 \| [ATX Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) \| 2x1 Pin Male Header \| ATX Supply Priority \|`
			`\| P15 \| [ACDC Priority Jumper](/helios64/jumper/#power-supply-priority-jumper-p14-p15) \| 2x1 Pin Male Header \| ACDC(AC Adapter) Supply Priority \|`
			`\| USB 3.0 \| [USB3 Host](/helios64/usb/#usb-on-helios64) \| USB 3.0 Host \| USB 3.0 Port Header \|`
			`\| SATA1 \| SATA \| SATA 3.0 \| Port 0 (SATA1) \|`
			`\| SATA2 \| SATA \| SATA 3.0 \| Port 1 (SATA2) \|`
			`\| SATA3 \| SATA \| SATA 3.0 \| Port 2 (SATA3) \|`
			`\| SATA4 \| SATA \| SATA 3.0 \| Port 3 (SATA4) \|`
			`\| SATA5 \| SATA \| SATA 3.0 \| Port 4 (SATA5) \|`
			`\| HDD_PWR \| HDD Power Conn. \| 8 Pin ATX 12V \| Rated for 5x HDD \|`
			`\| BATT \| [Battery Power Conn.](/helios64/battery/#li-ion-battery) \| 6 Pin ATX 12V \| Battery Backup \|`
			`\| ATX_4P \| ATX Power Supply Conn. \| 4 Pin ATX 12V \| 4 Pin ATX Power Connector \|`
			`\| 1Gbps ETH \| LAN1 \| RJ45 \| Gigabit Ethernet \|`
			`\| 2.5Gbps ETH \| LAN2 \| RJ45 \| 2.5 Gigabit Ethernet \|`
			`\| MICRO SD \| microSD \| Push-Push card connector \| Support SDHC and SDXC \|`
			`\| USB-C\| [USB Type-C Dual Role](/helios64/usb/#usb-type-c-functionality-on-helios64) \| USB Type-C Connector \| Via onboard FTDI USB-to-UART0 bridge \|`
			`\| PWR CON \| DC Connector \| Kycon 4-Pin Mini-DIN \| DC input 12V / 8A \|`
			`\| FAN1 \| [Fan Connector](/helios64/fan/) \| 4x1 Pin Male Header \| PWM and RPM support \|`
			`\| FAN2 \| [Fan Connector](/helios64/fan/) \| 4x1 Pin Male Header \| PWM and RPM support \|`
			`\| P1 \| [I2C Header](/helios64/i2c/#i2c-at-p1-header) \| 4x1 Pin Male Header \| I2C Bus 1 \|`
			`\| P2 \| [UEXT Header](/helios64/uext/) \| 2x5 Pin Male Header \| Universal EXTension Support [2] \|`
			`\| P3 \| [Front Panel Header](/helios64/front-panel/) \| 12x2 Pin Male Header \| PWM and RPM support \|`
			`\| P4 \| Buzzer Header \| 2x1 Pin Header \| Buzzer Speaker Support \|`
			`\| P5 \| [GPIO Pin Header](/helios64/gpio/) \| 7x2 Pin Male Header \| GPIO configurable as input or output<br>Via IO Expander on I2C Bus 0 \|`
Added Button Page 2020-03-16 16:41:28 +07:00			`\| PWR BTN \| [Power Button](/helios64/button/#power-button) \| Push Button \| Power Button \|`
			`\| RECOVERY \| [Recovery Button](/helios64/button/#recovery-button) \| Push Button \| \|`
			`\| RST BTN \| [Reset Button](/helios64/button/#reset-button) \| Push Button \| Reset Button \|`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`## Power Consumption`

			`Board only`

update hardware and led pages 2020-02-19 21:21:04 +07:00			`* Idle : X.X Watts`
			`* Active : X.X Watts`
removing .gitignore 2020-02-13 11:38:14 +07:00
update hardware and led pages 2020-02-19 21:21:04 +07:00			`Full Kit (with 5x HDDs)`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`\| State \| AC calculated<br>power consumption \| DC measured<br>power consumption \| Remarks \|`
			`\|---------------------\|----------------------\|----------------------\|---------------------\|`
update hardware and led pages 2020-02-19 21:21:04 +07:00			`\| Idle \| X.X W \| X.X W \| \|`
			`\| HDD Read Access \| X.X W \| X.X W \| \|`
			`\| HDD Write Access \| X.X W \| X.X W \| \|`
			`\| Standby \| X.X W \| X.X W \| HDD in Standby mode \|`
			`\| Suspend-to-Ram \| X.X W \| X.X W \| HDD in Standby mode \|`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`!!! note`
update hardware and led pages 2020-02-19 21:21:04 +07:00			`Measures were done using a Current Clamp Meter on the Helios64 12V DC input. AC Power consumption is calculated based on a AC/DC conversion efficiency of 85%.`
removing .gitignore 2020-02-13 11:38:14 +07:00
			`* Meter tool : Extech 380942 - 30A True RMS AC/DC Mini Clamp`
update hardware and led pages 2020-02-19 21:21:04 +07:00			`* AC/DC Adapter : (efficiency : YY%)`
removing .gitignore 2020-02-13 11:38:14 +07:00			`* AC Input Voltage: 220V`
update hardware and led pages 2020-02-19 21:21:04 +07:00			`* HDD: 5x YYY XX TB (HDDCODEXX) configured as RAIDXX`
removing .gitignore 2020-02-13 11:38:14 +07:00			`* Network : Connected at 1000Mb/s`
remove reset button on verview 2020-03-16 17:17:17 +07:00			`* OS: ARMBIAN Z.Z stable Debian GNU/Linux 10 (buster) 5.4.xx-yyy`
removing .gitignore 2020-02-13 11:38:14 +07:00

			`## References`
			`1. http://opensource.rock-chips.com/wiki_File:RK3399_Block_Diagram.png`
			`2. https://en.wikipedia.org/wiki/UEXT`